Super Hero Cape DIY Tutorial

I have a Son who has a shadow. A two year old shadow, always following at his heels, copying his movements, words and every silliness that can be had. Since his greatest ambition in life is to grow up to be Batman, he practically lives in his cape - zooming around the yard fighting bad guys, and all other injustice (the world needs more of these heroic men, doesn't it?). Along with all of this crime-fighting comes his little Sister - shadowing his every move like an apprentice in training.

So what a shame, I thought, that this little super heroine doesn't have a super cape of her own. A crime worthy of the baddest of bad guys! I have redeemed myself today, and hope to pass along this fun design to you, so that you may not face the wrath that I did. ;)

You will need:
- 2 Pieces 22"x 24" fabric (I used fabric remnants from the fabric store. 1 cotton print, 1 satin liner)
- 1 Piece Hook Velcro
- 1 Piece Loop Velcro (I prefer these over snaps, as they are safer and easier to break in event of
     choking)
- Scissors
- Sewing Machine

**Note: this cape is to fit a 2 year old, so you can adjust the length to fit your Little Hero (or big one!).

1. Decide on the top & bottom of the fabrics, line them up with right (printed) sides together on the inside.

2. Cut the bottom corners to be rounded, and cut a semi-circle from the top for the neck. I also tapered the sides so they angle up from the bottom of the cape to the top.
 

3. Line up the fabrics and start sewing with a 1/4" seam allowance. Sew all the way around the edge of the fabric, stopping about 4-5" from your starting point. You will need this opening to flip the fabrics right side out.

4. Open the hole, reach inside and pull the fabric through, flipping the whole thing right side out.

5. Straighten the seams, making sure to push out the corners on the neck pieces, so they are nice and square, or rounded, if you prefer.

6. Place the fabric in your sewing machine, starting just above the open hole that the fabric was pulled through. Roll the rough edges inside and carefully stitch (slowly to maintain control) the seam closed.
Continue sewing a 1/4" seam all the way around the fabric.

7. Now that you have the nice seam around the whole cape, we will add the velcro tabs. Place the Loop (soft) velcro on top of the right neck piece on the outside fabric of the cape. Sew securely.

8. Next, sew the Hook side on the left neck piece on the inside fabric.

9. They should lay on top of each other like this when finished.

10. Last, carefully apply whole cape to the neck of your favorite Super Hero and watch them fly!!